For Sale: 1968 Chevrolet C10 in Monument, Colorado

1968 Custom Build - Parts and Accessories List. Call David 817 726-7525 cell

The build on this truck is exceptional and done by two men, One taught a maintenance and auto shop class.
The other was the owner and did not build this to sell it. Spared no expense but did not go over board on aesthetics.
Building through covid required buying what is in stock which ended up being higher end parts. such as 35 spline,
or custom parts, transmission etc. All the common stuff was gone or had a two year wait.
The idea was to keep it as stock looking as possible on appearance while still doing a complete update on everything. 
The 540 stroker engine was custom built old school under a Sniper 2 EFI system cause it still looked like a Carburetor
to keep that old school appearance under the hood. Clean and simple yet extremely powerful but with head room
to do more if desired. Although 650 hp is nothing to complain about.  
Just look at the images, Can take more if needed.

• Comes with custom maintenance manual. Shows fuses, oil type/amount, tire sizes/type, brake types pads/
  coolant type/amount, rear end specs and everything one would need to know to repair and maintain the truck.
  Details for everything on the build and customized.
• Custom Balanced Engine Build Robbie McCabe Motor Sports 25k alone.
• 650HP/680 ft pounds of Torque/engine dyno
• Cam – Mild Aggressive - Duration Lift. Intake/Exhaust
• Completely new Polished Engine Dressing, AC Compressor, Power Steering, Tensioner, Water Pump, Alternator with Polished Aluminum Brackets.
• Super Sniper 2 EFI 800CFM 550-511 on top of a Edelbrock Single plane manifold.
• AFR Monitoring both Left and Right Exhaust. One via Holley and one External Gauge.
• Holley Digital Monitoring Configuration Screen.
• Custom Aluminum Fuel Tank relocated in Back.
• Internal Fuel Pump
• AFR Heads 325CC / 24 Degree
  https://www.airflowresearch.com/325cc-bbc-rectangle-port-cylinder-head/
• https://dartheads.com/big-m-mk-iv-gen-v-and-gen-vi-blocks/
• New Dart Block
•  700R4 Custom Billet Input Shaft Transmission with overdrive.
  Full Blown Shift Kit
  Input sonnax smart grum, Billet Input Shaft
• Shifted via B&M Mega Shifter
• 2800-3000 Branting Custom Stall Converter without lockup.
  https://www.industrynet.com/listing/428304/branting-industries
• New 35 spline 9 Inch Ford rear end 3:7 gears
• Custom balanced Solid Drive Shaft.
• Lokar updated gas pedal.
• New GM Shoulder Harness Belts
• Center Seat Belt for third person.
• Hugger Orange Paint inside and out. Few blemishes on the clear coat not being addressed at this time.
• Retro Radio modernized with Bluetooth and Aux inputs.
• $5000 Custom installed Alpine Sound System

             10” Kicker Subwoofer Behind seat mounted in Custom box door to door rear carpeting.
             Two 6x9 pioneer speakers in custom rear left right corner cab panels.
             Alpine amp located under seat. Custom Kick Panels with 6” Mid High Alpine Speakers.

• Custom made Center Console
• Sound Deadening and padding throughout interior, inside doors, panels, floor, behind dash and cab rear
  using Dynamat and topped with Foam, where possible, for heat and sound suppression.
• New Carpet.
• 100% complete new wire custom with new relays, plugs and countless ground straps to frame from components, panels, bed and cab.
• Custom Hidden Trailer Hitch with 7 way plug
• 3” custom Aluminized Exhaust tucked up inside frame with two O2 Sensors monitoring Right and Left Exhaust.
• Magnaflow FlowMaster Dual Muffler post H pipes.
• Custom H Pipes and Cross Member removable for Transmission Drop.
• Custom Turn downs
• Exhaust Cutouts with switch under dash.
• Ceramic headers
• MSD Pro Billet Distributor PN 83605
  https://www.holley.com/products/ignition/distributors/chevrolet/parts/83605
• MSD Blaster 2 Coil High performance PN 82023
•  New AC ducts Heater Hoses and AC Lines including drain line.
  New Aluminum Swivel Fittings.
• Dakota Digital Dash
• New Dashpad
• OEM lighter with light.
• Secret Security lockout installed. Can be active or inactive with simple swap.
• New dash bezels and switches headlight, wipers,
• Glovebox Liner replaced with new glovebox light custom USB connection inside.
• Custom Bed lighting hookup wiring
• Custom Gas filler installed rear side marker light or Bed.
  Gas filler removed and smoothed.
• Boyd Custom Aluminum Tank with internal Fuel Pump specifically built for Holley Sniper 2 EFI.

              Boyd Roll Over Safety Valve installed on Tank

• Gas Vapor vent AC canister.
• Frenched Stubby Antennae
• Side Mirrors smoothed
• 5 lug Conversion
• All Disc Brakes, uses chevy silverado 2003 pads in front and wilwood pads in back.
• Mickey Thompson ET STREET R DRAG 305/45/18 REAR
• Adjustable Coil Over suspension.
• Adjustable Sway Bars front and back
• Custom Adjustable Trailing Arms
• Derale Oil Cooler with fan and switch, Not installed
  Derale 15800 Electra-Cool Remote Oil Cooler 8AN 14K BTU. Not installed
• Derale Transmission Cooler Installed
  25 Row Hyper-Cool Remote Cooler, -8AN 46k BTU
• Remote Oil Filter. K&N HP-3001 (Fram PH8A)
• GoGlow Transmission Temp Gauge with Pan bung mounted sensor
• GoGlow AFR gauge for
• External Transmission Oil Temperature Gauge.
• Be Cool Large Radiator with Low Profile Radiator
  with 1 liter Aluminum Coolant Reservoir
• Custom Welded Reinforced C-Notch Frame
• True Frame off Restoration -
  Powder Coated Frame (Patched Reinforced and Custom Modified)
• After Powder Coating, Rubber coated all exposed metal and bolts screw heads underneath.
• Cab Bushings replaced and adjusted.
• Bed wood refinished.
• Bed removed Cleaned, Rubber Coated and remounted.
• All new seals and rubber bumpers replaced on entire truck interior and exterior.
• New windshield Pump relocated under hood from under dash.
• New windshield washer lines and reservoir.
• Power brakes Hydroboost. Like a new car.
• Aluminum AN AC lines
• New Aluminum 1 quart power steering and brake boost reservoir custom plumbed for two inlets.
• High end 18” Riddler wheels and Mickey Thompson ET R tires for traction on takeoff.
• Vents on doors rebuilt.
• Floor vent doors cleaned lubricated and remounted.
• Fire extinguisher mounted behind seats
• Copy links below to see Dyno Videos

Engine Dyno https://youtu.be/Jw5GyK84bIQ

Chassis Dyno https://youtu.be/VYA3X0QjBSI