Vehicle Description
Complete Restoration with SSII Package
Previous Owner has 45 Years of Experience, Including
Restorations
In 2023, the Previous Owner Acquired a Kentrol Fiberglass Body and
Another Scout to Begin this Particular Project
Over the Past Year and a Half, the Previous Owner Rebuilt,
Restored, or Replaced Every Component - Starting from a Sandblasted
and Painted Bare Frame and Axles
Sourced IH SV-345 CID Engine: Boring 0.030 Over, Machining Bearings
for the Mains and Cam, and Machining and Polishing the Heads and
Crankshaft
Engine Assembly Completed in Late 2023
Engine is Equipped with an HFI (Hamilton Fuel Injection) GM-Style
Throttle Body with a GM Computer that Also Controls Timing
TF727 Automatic Transmission was Rebuilt by a Local Shop
Dana 20 Transfer Case was Rebuilt with New Bearings and Seals
Both Dana 44 Axles Received New Seals and a Complete Brake Overhaul
(Disc Front, Drum Rear)
New 31/10.5.15 All-Terrain Tires were Installed on Black
Powder-Coated Scout II Wagon Wheels
Steel Structural Supports were Replaced, and All Original Floor
Supports were Removed and Replaced with Marine Plywood in Rear
Floor Section and 1.25" Coosa Board (Used for Boat Transoms) for
the Main Floor Supports
Firewall was Filled and Smoothed
Bottom of the Tub was Sprayed with Bedliner Material
Body Parts were Painted with a Blue CAS525 Color Code (Base Coat,
Clear Coat), then Wet Sanded and Buffed
SSII Style Graphics were Applied after Buffing
New Bestop Bikini Top and Hardware were Installed - Extending from
the Windshield to the Factory-Style Black Powder-Coated Rollbar
Factory SSII Grille and Door Inserts - with Metal Half-Door Frames
- Were also Installed
Interior Floor was Covered in Sea-Dek Style Marine Foam
Factory Bucket Seats and the Rear Fold-and-Tumble Bench Seat were
Re-Covered in Weather-Resistant Tan Vinyl with Blue Piping
Factory Center Console was Restored and a New Lid was Fabricated
and Wrapped with Matching Vinyl - Featuring an Embroidered IH
Logo
Factory Dash Pad was Restored and Covered in Matching Vinyl
Factory Gauges Restored
Waterproof Marine Dual Bluetooth stereo was Installed in Place of
the Factory Radio - with Speakers Integrated into the Vent Covers
in the Kick Panels
All New Wiring was Installed using an American AutoWire Harness
New Battery Wiring to the Starter and Ground Wiring to the Engine
Block were Installed - Along with a New Marine Battery
