Vehicle Description
1968 Chevrolet Corvair Monza Convertible
Until the 1950s, most American auto manufacturers made one size of
car: large. Imports from Europe such as Volkswagen, Renault, and
Fiat showed that there was a market in the U.S. for smaller cars,
mostly as a second car or an alternative for the budget-minded. Led
by General Manager Edward N. Cole, Chevrolet designed a
revolutionary new car. It was powered by an air-cooled horizontal
six-cylinder engine made almost entirely out of aluminum. The
engine was mounted in the rear of the car, driving the rear wheels
through a compact automatic transaxle. Suspension was independent
at all four wheels. There was no conventional frame; it was the
first unibody built by Fisher Body and the styling was
unconventional for Detroit, subtle and elegant, with no tail fins
or chrome grille.
This Monza Corvair is a consignor described project car that will
need some work and TLC to be restored. It has a 164ci flat 6
cylinder engine which does start and run thanks to having had some
work done to it. Other parts come with the car. There are plenty of
areas of invasive rust, rust bubbling and surface rust throughout
this exterior of the car. The interior is in a beginning state of
restoration and will also require plenty of attention, only after
structural unibody issues are thoroughly addressed.
Exterior
A previous respray of Butternut Yellow drapes the exterior of this
sporty air cooled car. There are many areas of scratching, chipping
and a few dents and dings, and plenty of invasive rust throughout.
Chrome is fair with loss of shine and dimpling creeping in. A black
padded canvas convertible top moves up and down, however has some
wear, particularly along the cloudy plastic window surround areas.
Shiny chrome wire wheel covers with spinners are wrapped in black
wall tires. There are 4 new whitewall tires to be included with the
car.
Interior
Looking good for the door panels, and front buckets and rear bench.
These look to have been completed, and show as originals once did.
The floors have plenty of surface rust and no carpeting. The dash
is in a state of initial wiring with no gauges hooked up at this
time. The board with the gauges is included. A rally steering wheel
is attached.
Drivetrain
This car came with a 164ci flat 6 cylinder and it is not known if
this one is original to this car. The consigner states this is a
1967 140hp engine, non smog, with headers. A 2-speed Powerglide
automatic is bolted to the mill and a 3.55 geared axle puts the
power to the pavement.
Undercarriage
The unibody and undercarriage has many areas of surface rust, and
the rockers are suffering from structural damage particularly near
and around the wheel wells. All independent coil spring suspension
is on, and drum braking is for all the corners.
Drive-Ability
While the car does start, run and drive, plenty of interior work is
needed to actually drive it safely. No test drive was administered,
but our consignor did drive the car around our vast parking lot a
few times to demonstrate it's abilities.
Innovative for its time, rear engine, unibody construction, smaller
more compact car, and the Monza upgrade, wheel this car in your
garage and start the work. When it rolls out you'll be the proud
owner of a classic like none other of its time.
105678W104446
1-Chevrolet
05-Corvair Monza
67-Convertible
8-1968
W-Willow Run, MI Assy Plant
104446-Sequential Unit Number
Classic Auto Mall is a 336,000-square foot classic and special
interest automobile showroom, featuring over 850 vehicles for sale
with showroom space for up to 1,000 vehicles. Also, a 400 vehicle
barn find collection is on display.
This vehicle is located in our showroom in Morgantown,
Pennsylvania, conveniently located just 1-hour west of Philadelphia
on the I-76 Pennsylvania Turnpike. The website is
www.classicautomall.com and our phone number is (888) 227-0914.
Please contact us anytime for more information or to come see the
vehicle in person.
