1967 BMW 2000 CS PROJECT
This 1967 BMW 2000CS is a running project finished in Pacific Blue and powered by a 2.0-liter M10 inline-four paired with a 4-speed manual gearbox. Work conducted under previous ownership included replacement of the fuel tank, tires, and fluids as well as a valve adjustment. This Euro-spec E120 is offered with partial records, an air cleaner, aftermarket exhaust system, German license plates, manual, and clean Florida title.
.The car is believed to have been repainted at least once in Pacific Blue. Rust repair is said to have been performed on the front valance, both fenders, rocker panels, and door bottoms under previous ownership. Remaining rust is visible on the rockers and floor pans, while a large dent with paint loss and corrosion can be seen on the right front fender. Several other areas show rust-through and bubbling, and the paint is cracked and worn throughout.
The 14″ steel wheels are reportedly date-coded to 1967 and wear reproduction hubcaps, three factory trim rings, and newer tires. The interior features black vinyl and white cloth seats as well as grey textured velour inserts. Tears are noted along the edges of the backrests along with cracks on the steering wheel and holes to the left of the instrument cluster. Wood veneers remain affixed to the dashboard and door panels. The odometer shows just under 26k kilometers (~16k miles), and is believed to have rolled over once. The shifter bushings are said to be worn, with the linkage occasionally making contact with the driveshaft.
The 2.0-liter M10 inline-four is equipped with twin Weber DCOE 40 carburetors and backed by a 4-speed manual gearbox. A compression test conducted under previous ownership was said to have shown results of 140-145 psi across all four cylinders. Further maintenance by the previous owner included a valve adjustment and fluid changes.
AS IS - NO CONTRACT / WARRANTY
This vehicle is being sold as-is, where-is with no warranty, expressed written, or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect, or damage. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. It is the responsibility of the buyer to have thoroughly inspected the vehicle, and to have satisfied himself or herself as to the condition and value and to bid based upon that judgment solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this vehicle at the buyer's request prior to the close of the sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the vehicle.