This 1966 Coyote Legend Bronco is currently being restored at Rocky Roads to a very high level. This Bronco is 100% rust free, the ALL NEW steel licensed Ford Bronco body was built using all new Licensed Ford parts. It will get a black Polyuria interior bed liner and will be fully under-coated with Polyuria upon completion. It can still have any wheel and tire combo you want. It will end up in the $165K to $185K range upon completion . This 430HP Gen 2 Coyote Bronco build will have a 4R70W four-speed automatic transmission, backed up with an Atlas 2 3.0 ratio two-speed shift-on-the-fly transfer case. Wilwood top-of-the-line four-wheel disc brake system with Hydroboost. The new Currie Dana 44 front axle housing has 4.11 gears with a True-Trac in front, plus a new Currie Ford 9 inch housing with a True-Trac unit in the rear, both have new hardened axles, new bearings, seals etc. This Coyote Legend Bronco will be brand new throughout. It could get chrome bumpers or heavy-duty plated steel Legend Hybrid front bumper, with a Rock Solid rear bumper, powder coated black, with a swing out tire carrier and a matching spare wheel and tire. The entire factory stock suspension has been removed and new 12 inch coil-over Legend suspension has been installed. It has new 2.5 inch King 12 inch coil-over shocks and Eibach coil springs in front, with rear trailing arms, 4 link, and it will soon be getting new 2.5 inch King shocks and Eibach springs in back, plus all-new bump stops and limiting straps. There will be sway bars in front and in back to make it handle excellently both on or off-road, for a total of 10 inch front and 12 inch of rear wheel travel in back.
We can either keep it UNCUT and go with smooth retro 17x7 inch wheels and 285/65R17 tires, or we could cut the fenders and install new match painted fender flares in the front and in back to accommodate 305/65R17 BFG All Terrain tires and 17x9 inch black MHT wheels. It will receive all new grade 8 and stainless steel hardware throughout. The interior will be a new diamond-stitched ball glove leather Legend high back bucket seating in front, the rear seat will be a folding rear seat with headrests. It will have matching diamond stitch leather door, rear side and tailgate paneling, plus new snap-in carpet mats throughout. A black locking center console will house a new Alpine head unit that has Bluetooth, with a speakerphone system. FoCal component speakers will be flush-mounted in the rear side panels as well as in the front kick panels, powered by a 5 channel Alpine amplifier with a new Centek wire harness, a new 12 inch Alpine subwoofer inside, plus an interior LED light and LED lights throughout. It has a new RR Legend 6 point roll cage, powder-coated black, with retractable front and rear seat belts. It's getting a new custom built Legend dash with new headlight switch, new wiper switch, a new blue-lit white-faced Dakota Digital or Classic Instruments speedometer, with 4 round air conditioning vents in-dash, plus a new A/C system. The glove box will be either a black locking glove box or a stock Bronco glove box. �More details to come as we get further into this build. It is next up in our 2020 queue. Scheduled completion date: Spring of 2021. Call Shaun for more details and pricing 310-293-7801