This 1973 100% rust-free California Bronco Sport is in the process of being completed to a very high standard. We sold the Bronco in the photos in May of 2020, but we are building another Bronco just like the one in the completed pictures. It's a new Amazon Blue color. The one we are building is currently uncut, but we could cut the fenders and install match painted fender flares if you want those things done. You can still call a lot of the shots if you like the way this one is going so far. This Bronco is getting a 367HP fuel injected Blueprint Crate 306 engine with a new serpentine belt system with an Edelbrock Performer intake, a Holley Sniper fuel injection system, a new aluminum radiator, new ceramic long tube headers, a new FlowMaster exhaust system, a new 23 F.I. gallon fuel tank, 4.11 gears with Tru-Trac rear differentials, disc brakes in front and in the rear, everything in the drive line has already been upgraded to new top-of-the-line parts.
Like the one in the completed photos, the Bronco we are building has extended radius arms and new variable rate coil springs up front. It is getting a freshly rebuilt 4-speed automatic transmission, plus a rebuilt Dana 20 t/case with a new James Duff chrome 4x4 shifter with wooden shift knob and billet dress up kit. It is getting a new black steering column with wooden steering wheel. It has a 4 turn Lee power steering gearbox, new hydro boost system, a black Tuffy locking center console, plus a new custom Rocky Roads LLC wire harness. It has new stainless steel brake lines, all new brake hoses, new fuel lines down the frame and to the tank, new fuel vent lines, and a new filler hose. It has a new match-painted streamlined Legend dash (without the ash tray and speaker holes) with Vintage AC with round A/C vents inside and rectangular A/C vents on the outside, a new RRB Classic Instruments Digital speedometer, new head light and wiper switches, all new knobs and bezels, a new black locking glove box, with the proper metal VIN tag and a new VIN sticker inside of the drivers side door.
This Bronco will have all new rubber, seals and hardware throughout. It will have restored stock front and rear seats with shoulder belts in front, plus a restored stock rear seat, a new black powder coated Legend 6 point family roll cage. It will have new LED head lamps, chrome headlamp and tail light bezels, all new side marker lights and new tail light lenses, plus new show-quality chrome front and rear bumpers. If you want a powder coated black Rock Solid rear bumper with swing out tire carrier and a matching spare, this could be installed still. We are going to install a new set of powder coated white Smooth Retro wheels with 265/65R17 BFG AT tires and Ford dig dish hub caps (if we keep it uncut) or a set of 15 x10 inch aluminum wheels with 32 x 11.50 x 15 All Terrain tires if it gets cut and flared. Call us and let us know which wheel / tire combo you like most and we will be happy to consider them. If you end up purchasing this Bronco, we will be happy to put the wheels and tires of your choice on it for you.
It comes with a restored off-white hard top, a new black Safari top, plus a new tan STC soft top. There will be a warranty from the builders of the Blueprint Crate engine, the 4 speed automatic transmission, plus all new parts that have the manufacturer's warranty on them. A professional appraisal and Marti Report will be been done when this vehicle is completed.
Estimated cost upon completion (depending on which features we decide to install) $165K to $170K (plus any taxes/DMV fees)
Call Shaun for more details 310-293-7801