Vehicle Description
Champion Motors International is proud to present this 1999 Hummer
H1 Wagon. This ONE OWNER Hummer has spent its entire life in PA,
where it was maintained perfectly from new, with ONLY 7,759 miles.
This particular vehicle has all the service records and tool bag.
This vehicle is 1 of 831 produced in 1999.The beautifully kept Jet
black exterior is nearly flawless with no imperfections that we
have seen. The grey interior is like new also with no rips, tears
or stains. The Hummer H1 was available in three major variants: a
convertible-like soft top, a four-door hard top Sport Utility Truck
and an "Alpha Wagon" body version. Less known variants were a
two-door pickup truck and a four-door slantback, which shares the
same body style of the Humvee employed by the U.S. Military. The
convertible/soft top and the station wagon versions were the last
types available to individual consumers.Under the hood is the
monster 6.5 L Turbo Diesel mated to a 4 speed automatic
transmission. The Hummer H1 shares some common driveline parts with
the HMMWV. These include brakes, axles, frame and major body panels
(hood, tailgate and quarter panels) are shared between the HMMWV
and Hummer H1. All H1s and HMMWVs were produced on the same
assembly line; of which civilian H1s were then painted and finished
in a separate building opposite the parking lot.The H1 models are
inherently stable due to their wide track. They can ford 30 inches
(76 cm) of water and climb a 22-inch (56 cm) step. Their stock
ground clearance of 16 inches (41 cm) is made possible by tucking
driveline components inside a channel in the central space between
the left and right seats. They have high approach/departure angles
of 72/37.5 degrees. Most H1s are equipped with a Central Tire
Inflation System(CTIS), which enables the driver to increase or
decrease the tire air pressure at the push of a button, since lower
tire pressures are more suited for off-road, and higher tire
pressures are desirable on-road.The H1 features 16 inches (40 cm)
of ground clearance as well as aggressive approach and departure
angles, allowing it to clamber over a 22-inch (56 cm) high
obstacle, handle a 60 percent grade and wade through up to 30
inches (76 cm) of water."[3]Hummer H1s have other unusual features,
such as inboard brakes and portal gears that allow the drive trains
half shafts a higher placement, for greater ground clearance. The
radiator is up high, sloping over the engine on a forward-hinged
hood. The air intake is high-mount, enabling the H1 to ford
waist-level water. Rather than using simple run flat tires,
magnesium-aluminum alloy or rubber inserts are an optional feature
for run flat ability.*While every reasonable effort is made to
ensure the accuracy of this information, we are not responsible for
any errors or omissions contained on these pages. Please verify any
information in question with Champion Motors International.