1970 Ford Mustang Mach 1 This Pony has been DRASTICALLY upgraded
and yet still managed to keep the vintage look of a 70. The body is
finished in a stunningCandy Redcomplementedby a classicsignalhood
and all stripes are painted! It also hasnew chrome and polished
stainless steel trim.Take a look at the pictures and they will show
SMOOTH contours and CRISP body lines! The car presents itself
extremely well and the paint is super niceas well, SHOW QUALITY.
Thebody work took a little over 6 months non stop to complete. 5
coats of base color with 7 coats of clear to get the mirror finish
you see in the pics. All the striping including the 351 numbers are
all painted. no decals or stickers. All panel gaps line up well and
doors open and close as they should. You can look down every panel
with confidence!All trim has been polished to SHINE! The glass on
this car is NEW and easy to see through. The grill is in great
condition and the headlights are clear as well. The taillights are
not weathered in any way and are free of cracks. The bottom of the
doors are crisp and sharp! The rocker panels are solid as well. It
rides on a set of period correct wheels. The interior is in amazing
condition as well with high back bucket seats and a sport fold down
rear!The carpet is brand new and free of rips and stains. The
headliner is nice and tight and free of stains as well.The door
panels have been newly recovered and are free of rips. All hardware
works as it should and looks great! As pictures show these gauges
are super clear and easy to read! The dash mat is brand new and
free of any UV damage. As you pop the hood you will notice a351
Cleveland hooked to the factory FMX, after slight mods on the
engine it has dyno tested at 330 Hp @ 385 ft lbs of torque. Itsnot
a tire roaster but runs strong and has great street abilities.
The351 Cleveland is bored 30 over with a stage 1 Crane cam, All new
pistons, rings and bearings and a slight grind on the crank just to
clean it up! The Original block was to far gone so a 71 block was
used for a donor.The heads are the original. Up topan Edlebrock
Performer series intake manifoldwith a Holly Demon Carb (625CFM).
The 351 is paired to aFresh FMX completely restored Trans with a
slight shift kit and a 1800 stall Converter. A9"" Ford is in the
rear that has been kept stock and just went through and adjusted
and all new seals and bearings. 3.00 Ratio. It sounds incredible
thank toCustom built headers from Ford Powertrain Applications out
of Puyallup ,Wa. These reduce down to a 2.5 stainless steel system
with flowmaster going to the rear then out the Scott Drake Mach 1
Tips under the rear valance. It rides like a DREAM withNewUpper and
lower Control Arms, Ball Joints, Idler Arm, Inner and Outer Tie rod
Ends and Adjusting sleeves, Strut Rod Bushings, Sway bar Bushings
and Stabilizer Links (Front and Rear), Rear lift springs (standard
height) and KYB gas shocks all the way around. If you are looking
for a SUPER clean, FAST and collectible car that will do nothing
but go up in value and give you hours of enjoyment with your
investment this is the car for you! This is a lot of car for the
money and if you have been looking for a clean, somewhat stock
looking 70 that will wake your neighbors and make Camaros shake you
have found your car! We have a TON ofreceipts, for the money that
has went into this build! If you know cars then you will KNOW the
amount of money it has taken to get this 70 where it is today! Do
we expect to get all of the money out of it....no, but the car is
WELL WORTH THE ASKING PRICE and more! If you have any questions
please call Bobat701-527-7721 Or
[email protected] GOT
A TRADE WE'RE INTERESTED!! THANKS FOR LOOKING!!