Vehicle Description
1967 Plymouth Barracuda | Ardell Brown Classic
Carswww.ardellscars.com/1967-plymouth-barracuda/1967 Plymouth
Barracuda Was $39,995.00 Now $29,995.00This exceptionally
attractive example began life as a 1967 Plymouth Barracuda High
Price Class sports coupe with an RG 225 cid 6-cylinder engine
before it was fully restored and provided with a period-correct
1970 340 cid V-8 engine with the oversized valve J-type cylinder
heads and a 4-speed manual transmission.ENGINE: The car is fitted
with a 1970 340 cid engine with J casting heads which are the large
valve heads for 1970. The induction system features an Edelbrock
RPM Air Gap intake manifold and Edelbrock 600 cfm performer
carburetor, while that exhaust headers are fabricated from 1 5/8
tubing by Heddman. According to Dynomometer testing done by Hot Rod
magazine, these additions should yield 350 bhp and almost 380
pound-feet of torque.DRIVE TRAIN: The transmission is the OEM unit
and has been rebuilt with close ratio 1-3 gears and an overdrive
4th gear for use on the freeway. The rear end was rebuilt and has a
3.55:1 limited slip differential.CHASSIS: Purchased in Southern
California, this car has a dry chassis with no visible rust.ENGINE
COMPARTMENT: The engine bay was restored nicely and painted black.
Is very clean and chrome pieces are shiny and free of grime and
present very nicely.EXTERIOR: Painted in a Viper yellow paint with
new chrome bumpers this barracuda looks excellent. Body panels are
very straight and all other bright work is in great original
condition.INTERIOR: The interior has been redone with new
upholstery both front and rear and new carpet throughout. The dash
was painted and it was fitted with a new dash pad. All gauges work
as they should. The black headliner is clean and has no rips or
tears.TRUNK COMPARTMENT: Trunk area is carpeted with black carpet
matching the interior and is very clean.The second-generation
Barracuda, now a 108in (2,743mm) wheelbase A-body, still shared
many components with the Valiant but was stylishly redesigned with
model-specific sheet metal, and a convertible and hardtop coupe
joining the original fastback offering.The new Barracuda was
chiefly the work of John E Harlitz and John Samsen,with Coke-bottle
side contours and heavily revised front and rear ends. Design cues
included a concave rear deck panel, wider wheel openings, curved
side glass, and S-curved roof pillars on the hardtop.The rear
portion of the roof on the fastback coupe was more streamlined, and
the back glass, raked at a substantially horizontal angle, was much
smaller compared with that of the previous model. Also, the use of
chrome trim on the external sheet metal was more restrained.During
this time the first U.S. Federal auto safety standards were phased
in, and Chrysler's response to the introduction of each phase
distinguishes each model year of the second-generation Barracuda: